TRIGA BORE (3 point internal mesuring system)
Triga-Bore heads have a large measuring range and are supplied with fixed anvils eliminating operator error. 22 heads and 10 ring gauges cover 6-200mm.Unique system allows two measuring handles to cover 6-200mm range Ergonomically designed handle offers single handed operation with unique adjustable stop for short range ansducers.High dergree of accuracy can be achieved without need for special skills.Customer can specify type of output for SPC applications Ideally suited to simple or integrated measurement applications.Can be used for special applications such as threads O ring grooves, spherical forms etc.
TRUE BORE (3 point internal mesuring system)
True-Bore heads have a large measuring range and are supplied with fixed anvils eliminating operator error. 22 heads and 10 ring gauges cover 6-200mm.Unique system allows two measuring handles to cover 6-200mm range.Ergonomically designed handle offers single handed operation.High dergree of accuracy can be achieved without need for special skills.Customer can specify type of output.Ideally suited to simple or integrated measurement applications.Can be used for special applications such as threads O ring grooves, spherical forms etc.
TRUE CAL (A new and cost saving approach to calibrating 3 point bore gauges)
THE TRUE-CAL SYSTEM: True-Cal is an innovation solution to the problems presented by the accurate calibration of 3 point bore gauge micrometers. Any micrometer (from 16-200mm) can be calibrated on a single unit, and the True-Cal method dispenses with the need for large numbers of settings rings and provides more comprehensive results. OPERATIONS:The True-Cal system relies on the use of slip gauges with an optional electronic transducer output. Operation is quick and simple, and requires no specialist skills. LINEARITY CHECK:Convensional ring gauge methods do not give comprehensive indications of linearity. True-Cal allows the gauge to be checked at any point on the range o the gauge being inspected. TRACEABILITY:True-Cal measurement are traceable through the slip gauges used and the certification of the angular setting block. COST SAVINGS: True-Cal simplifies gauge management by dispensing with the need for costly ring gauges and their periodic calibration. This reduces costs in both the long and short term.
Sangha Metrology is a well established Manufacturer & Supplier of 3 Point Measuring System for Internal Diameters.Mitutoyo Borematic System is composed of 3 point measuring heads in similar designs to Sangha Metrology. Standard Mititoyo Borematic has a range of 6-110mm. All heads above 20mm dia. Have interchangeable anvils.Sangha Metrologys standard heads 110-200mm can be directly used with Borematic handle. A range of standard and non standard anvils for the standard Borematic heads can be supplied offering capabilities to measure internal O Rings, Splines, Recesses, Spherical Diameters and Threads.Standard and special heads can be supplied to Retrofit customers existing system or can be sourced a new.
Bore Gauging measurement requiring customised measuring heads. Heads to measure 'O' ring grooves, splines, recesses and thread gauging can be supplied. Special applications are available for TRIGA-BORE and TRUE-BORE. Sangha Metrology can supply special application heads and anvils to suit other borematic handles. Heads to extend the borematic range from 110-200mm are also available TRIGA-BORE and TRUE-BORE handles and heads can also be supplied to interchange with other bore gauging systems.
PLATE-CHECKER is now a new product, specially designed to measure plate or sheet thickness. It offers simplified measurement of difficult to measure components requiring differential measurement using two gauges. Two Mitutoyo Digimatic Gauges are used to differentially output the thickness of the plate with resolution of 0.001mm. Simple version is shown with hand operated cable lift method. Units to suit specific applications for size and levels of automation.